Dimple Pleat HEPA Filter
No Strings, Glues, or Strips
DIMPLE-PLEATâ filters. This unique filter utilizes a completely separatorless and self-supporting media pack, requiring no gule, string, or strips of media to hold adjacent folds of the media apart. Such separator materials are potential sources of off-gassing or particle generation, and may not meet the stringent smoke and flame requirements of UL 900 Class 1. They can also block up to 10% of the filter’s effective media area! The DIMPLE-PLEAT eliminates these materials as a contamination concern, while fully utilizing the filter’s media content and providing a clean, streamlined appearance.
The Gel Seal Design
Instead of a gasket, the filter has a perimeter channel filled with
BLU-JELâ Seal, and a highly self-adhesive,
self-healing silicone compound. When the filter is raised into position, a
‘knife-edge’ flange in
the hood mates into the gel channel, effecting a leak-tight interface. A simple
retainer on 4 corners is turned 90° to hold the
filter in place and the design of the retainer assembly will not allow the knife
edge to bottom out in the gel track of the filter.
Invented to eliminate the bypass problems associated with conventional gasketed filters, the gel seal technique provides superior leak protection for critical cleanroom installations.
Gel Seal Dimple Pleat Filters
Gel Seal Dimple Pleat filters have a channel provided on the downstream perimeter of the filter frame and is factory-filled with Blu-JelÒ Sealant. A knife edge flange located in the hood or module is sized to mate into the channel. When the filter is lifted into place, the knife edge submerges into the gel to effect a leaktight interface between the filter and the equipment. The filter is held in place with simple retainers at each corner.
Important Features:
|
Filter Specifications |
99.99% on 0.30 micrometers |
||||||
|
Size |
2 in. Size Designator |
4 in. Size Designator |
6 in. Size Designator |
Cfm(1) |
2 inch |
4 inch |
6 inch |
| 21-3/4"x20" |
E1286 |
- |
- |
235 |
.52 |
.35 |
.28 |
| 21-3/4"x44" |
E1386 |
- |
- |
560 |
.52 |
.35 |
.28 |
| 21-3/4"x42-3/4" |
E0696 |
- |
- |
580 |
.52 |
.35 |
.28 |
| 22-3/8"x46-3/8" |
E1692 |
- |
- |
610 |
.52 |
.35 |
.28 |
| 21-3/4"x18-3/4" |
E0796 |
- |
- |
243 |
.52 |
.35 |
.28 |
| 21-3/4"x44" |
- |
E0988 |
- |
560 |
.52 |
.35 |
.28 |
| 21-3/4"x20" |
- |
E1188 |
- |
235 |
.52 |
.35 |
.28 |
| 21-3/4"x44" |
- |
- |
E3088 |
598 |
.52 |
.35 |
.28 |
| 21-3/4"x20-3/4" |
- |
- |
E3188 |
243 |
.52 |
.35 |
.28 |
(1)Cfm based on 100 fpm velocity per sq. ft. net media face area
Call Toll Free 1-800-334-9142