V-Bank Side Access Filter Housings
Single Stage

Aluminized Steel Construction Extends Life, Enhances Appearance

Standard material of construction is 16 gauge aluminized steel selected to provide superior corrosion and heat resistance resulting in longer product life. Appearance is also enhanced compared to galvanized steel construction.

Aluminized steel conforms to ASTM Spec A463 and is used in products such as space heaters, mufflers and incinerators which are subject to extremely corrosive conditions.

The housings are supplied with one access door, hinged at the rear of the unit for easy access to the fitlers. The door is fully gasketed around the perimeter and at the ends of the filter tracks. Quick action, positive lock, over center draw latches are used to seal the doors. V-Bank housings are equipped with a 1-1/2 outer flange for easy connection to ductwork.

  • Hold 2" or 4" deep filters
  • Factory Assembled
  • 16 Gauge Aluminized Steel
  • High Capacity Design-Only 27-5/8 deep

Completely Factory Assembled-Reduces Installation Cost

Airguard V-bank filter housings are constructed as a rugged one piece assembly for side service installations. Completely factory assembled, they are ready for installation in a minimum amount of time when received at the job site.

V-Bank Design Doubles Rated Air Flow Capacity

Filters are installed in a V-bank arrangement permitting doulbe the air volume compared to flat bank housings with the same size opening. V-bank housings are only 27-5/8" deep (2" filters) or 28-5/8" deep (4"filters).

Designed for 7.0" W.G. Pressure

16 gauge steel with welded construction allows the standard units to operate at pressures up to 7.0" W.G. High pressure units for applications operating up to 10" W.G. are available.

 

OPTIONS:
  • Extra access door
  • Weatherproff units for outside installations consist of a pitched roof, rain guards over the doors and caulking of all seams.
  • 1" thick insulation is available in 1.5 and 3.0 pound densities
  • Flange adaptors to match up with air handlers (Specify manufacturer)
  • High pressure design (10" W.G.)
    (Specify positive or negative)
  • Static Taps
  • Support legs
  • Hanger brackets

Call Toll Free 1-800-334-9142