BAGGING
COLLAR:
Standard two-rib design which allows for all subsequent filter change-outs
to be accomplished using change-out bags.
DOOR ALIGNMENT SUPPORTS:
All full-size isolation housings are equipped with door alignment posts to
support the weight of the door while aligning fasteners.
LEAFLOK™ CLAMP
MECHANISM:
The LeafLok™Clamp Mechanism exerts a spring-loaded force on the filter
element. This constant force compensates for relaxation of the filter
gasket over time.
STATIC PRESSURE PORTS:
Standard on all isolation housings, these ports are used to install
differential pressure gauges.
TAMPER-PROOF DOOR:
The door design extends over the clamp mechanism operators, which prevents
tampering with the mechanism without the intent of changing filters.
OTHER FEATURES:
2" Prefilter Channel, Door Handle, Identification Nameplate |
MAGNEHELIC
GAUGE:
The differential pressure reading will indicate when the particulate
filter requires changing.
WEATHER CAP:
When housings are located outdoors, a weather cap is recommended to
prevent debris build-up on the housing.
LIFTING LUGS:
Lifting lugs are provided to allow cable attachments when lifting the
units onto roof tops or other structures.
SKID MOUNTING:
Custom skid mounting can adjust the housing elevation to meet various
dimensions.
TRANSITIONS:
Inlet and outlet transitions can be added to meet field dimensions.
ISOLATION/CONTROL
DAMPERS:
Additional flow control and shut-off capability can be achieved by
installing control dampers.
CUSTOM FILTER TRAINS:
Housing are attached in series to remove various contaminants. |
