|
The Hospi-Gard® IsoClean®
is a portable, self-contained high efficiency particulate air (HEPA)
filtration system designed to easily and economically create a negative
pressure isolation room that will meet OSHA and CDC TB guidelines.
The IsoClean can be used as a positive
pressure clean air recirculating system in clinics, waiting rooms,
hospital emergency rooms and other confined areas or as a partial or
complete exhausting system to create a negative pressure isolation room
for possible use with patients known or suspected of having TB, SARS or
other infectious diseases.
As a recirculating unit, the IsoClean®'s
powerful motor/blower can deliver up to 800 cubic feet per minute (CFM)
or 1360 m3/hr to provide a large number of room air changes
per hour to minimize the spread of airborne diseases to patients and
healthcare workers.
As a negative pressure unit, the air
passing through the HEPA filter is cleansed of 99.99% of particles as
small as 0.3 micron and may be exhausted directly to the exterior
through a window or a wall simply by connecting flexible ducting to the
6 in. (152 mm) collar located on the top of the IsoClean®.
The Hospi-Gard® IsoClean®
filter contains 220 square feet (20.4 square meters) of media to extend
its usable lifetime before filter loading occurs, resulting in decreased
cost and fewer filter changes.
Low Cost
Isolation Room
An easy and economical solution for creating a negative pressure,
isolation room. Simply roll the IsoClean® into a standard
room, connect flexible ducting to the 6 in. (152 mm) collar on the top
of the unit for partial exhaust or to the optional 8 in. (204 mm)
flanged collar for total exhaust and vent the purified air to the
exterior through a window or wall.
Flexible
Applications
The versatile IsoClean® can be used as a clean air
recirculating unit, a negative pressure unit or as a split system to
create both negative pressure and clean air recirculation by
simultaneously exhausting some of the air out while recirculating the
remainder back into the room.
3-speed
Adjustable Airflow
With speeds ranging from 550 to 800 CFM (935 to 1360 m3/hr) ,
the IsoClean® provides effective air filtration for a wide
variety of room sizes.
Room Air Changes
Per Hour
Provides up to 27 room air changes per hour (ACH) in a typical 18 x 12 x
8 ft (5.5 x 3.7 x 2.4 m) patient room or up to 12 ACH for rooms up to
4,000 cubic feet (113 cubic meters). |
Low to High Clean
Air Circulation Pattern
Room air, along with airborne contaminants is drawn into the intake
grille at the bottom while the purified air is discharged at a high
velocity from the exhaust grille located at the top of the IsoClean®
to generate a sweeping, low-to-high air circulation pattern with
adequate "reach" to optimize the clean breathing zone for
patient and staff.
Small and
Portable
The IsoClean® can be rolled from one room to another and
easily fits into areas with limited floor space.
Simple
Maintenance
Both HEPA filter and prefilter are easily accessible for replacement by
authorized personnel.
Quiet Operation
52 dBA on low, 56 dBA on medium and 60 dBA on high speed measured 30 in.
(762 mm) from face of the unit.
Filter
Aluminum Framed HEPA type, with a minimum efficiency of 99.99% @ 0.3
micron, aerosol challenged (zero probed). Airflow sensor indicates when
the filter needs changing.
Prefilter
Disposable non-woven polyester media with frame - 30% ASHRAE.
Airflow
3-speed adjustable airflow at 550, 690 and 800 CFM ±10% (935, 1173,
1360 m3/hr 10%).
SPECIFICATIONS
|
