General

The Superflow 24 is a V-bed HEPA filter (99.99% at 0.30 micrometer) specifically designed for high airflow applications requiring HEPA efficiency at an ultra low pressure drop. The Superflow 24 can be incorporated into systems with air velocities of 600 fpm and a pressure drop of 1.0-inch w.g.

Product Design

The Superflow 24 filters are manufactured with wet laid microfine fiberglass media. The media is formed into a minipleat utilizing a hot melt separator and arranged in a V-bed configuration. There are twelve individual minipleat packs sealed on all four sides to the frame with two component polyurethane.

The Frame is constructed of 16 ga. galvaneal or stainless steel and consists of vertical support struts of the same material. Vertical supports are attached to the frame body without the use of mechanical fasteners. The vertical supports act as the sealing surface of the mini pleat packs.

Product Options

The Superflow 24 filters are available in aluminum, galvaneal or stainless steel frames and with gasket seal or gel seal design.

Gasket Seal

The filter gasket is 1/4"x3/4" black neoprene attached to the frame with an adhesive and the gasket joints are dovetail to ensure no penetration of particulate due to the gasket. The filter is designed for installation into Flanders front load B-1 holding frame, Surelock C Gasket Seal Housing and Surelock-B Side Access Housing.

Gel Seal

The filter gasket is Blu Jel filled into a channel around the perimeter of the frame. The gel seal design provides the highest degree of sealing intergrity between the filter and holding device. The filter is designed for installation into a front load A-4 holding frame or Surelock-C Jel Seal Housings.

Features and Benefits

The product offers the following advantages over conventional HEPA filters.

Longer Life

Gasket seal Superflow 24 filters have 400 sq. ft. of  media compared to 240 sq. ft. for traditional HEPA filters. The greater media area provides a longer time period between filter replacements.

Improved Efficiency

The significant quantity of media translates into an extremely low media velocity. Therefore a minimum overall efficiency of 99.99% at 0.30 µm is easily assured. Traditional HEPA filters have an overall efficiency of 99.97% at 0.30 µm.

Lower Operating Cost

The typical HEPA filter pressure drop can range from 1.4-inch w.g. to 1.8-inch w.g. at the rated flow. The pressure drop of the Superflow 24 is 1.0-inch w.g. at the rated flow.